Tutorials Passion

Reasons to make hard drive password protected, "I need hard drive password protected " this was the first demand when I started learning computer, my first question was based on data security "How can we make our hard drive password protected to save my data ?" my teacher told me many ways to hide and prevent access using many utilities, up to some extent I followed and use to hide my  personal data additionally people who have to travel around whole year carry their Net book and Notebook with them and sometimes they accidentally lose the laptop and the important data, In this condition the data in the wrong hand can be used for some evil purposes. 

WHY TO MAKE HARD DRIVE PASSWORD PROTECTED?

Here comes the actual role of our BitLocker Windows 7 made it easy it has default feature to secure the disk, It encrypts the data and makes your hard drive password protected even if the laptop is lost or stolen the data can't be misused, so let's secure our data. We are going to perform some easy steps to create (Encrypt) password on the hard disk.

Step#1: Click on Start Then Click on Control Panel,

Step#2: In Control Panel click on System and Security. Hard drive password protected

Step#3: You will get BitLocker Drive Encryption click on it, (If you do not find this page then Scroll Down)

You will find this page if you didn't find that page, Click on the highlight Red Box Option,

Step#4: After any of two pages you will find this page.

Step#5: Now Turn On BitLocker, Check  the first option and set your password. it must be more than 8 Character.     Example : sunday@123 (Note: please write down your password)

Step#6: Now It will give you option to choose how do want to save Recovery Key in case if you forgot the password, so Click on Save the recovery key to a file,

Step#7: As an Example I am saving the Recovery Key on the desktop, you can save as per your choice,

 

Step#8: The Recovery Key has been saved, click on Next to proceed,

Step#9: You are ready to encrypt the drive, make sure you remember the Password and This encryption is going take Some hours(Depends on the data that you have) to complete so please don't panic if it takes time don't shut down however you can restart the machine as and when you want.

Click Start Encrypting. at long last the hard drive will be password protected

The Encryption is started now..........................

After a couple of hours or more than the encryption will be complete and Hard drive will be password protected

This Message will be displayed at the Completion of the Encryption.

And

Bitlocker Option is available only on Windows 7 Ultimate and Enterprise Edition
s

McAfee Stinger 10.2.0.990 | 9.93 MB

Stinger detects and removes prevalent Fake Alert malware and threats identified in the “List Viruses” section of the Stinger application. While not a replacement for full fledged antivirus software, Stinger is updated multiple times a week to include detection for newer Fake Alert variants and prevalent viruses.

Stinger is a standalone utility used to detect and remove specific viruses. It is not a substitute for full anti-virus protection, but rather a tool to assist administrators and users when dealing with an infected system. Stinger utilizes next-generation scan engine technology, including process scanning, digitally signed .DAT files, and scan performance optimizations. It detects and removes threats identified under the “List Viruses” icon in the Stinger application.

Stinger includes detection for all known variants:
-W32/Anig.worm, -W32/Bagle, -Exploit-DcomRpc, -Exploit-Lsass,
-IRC/Flood.ap, -IRC/Flood.bi, -IRC/Flood.cd, -PWS-Narod,
-W32/Sdbot.worm.gen, -BackDoor-JZ, -BackDoor-AQJ,
-BackDoor-CFB, -Backdoor-CEB, -Bat/Mumu.worm; -IPCScan;
-NTServiceLoader; -PWS-Sincom.dll; -W32/SQLSlammer.worm;
-W32/Bagle.bf – .bg@MM; -W32/Bagle.bl@MM; -W32/Bagle.bj – .bk@MM;
-W32/Bagle.bi – bn@MM; -W32/Bagle.dldr; -W32/Bagle.bo – bt@MM;
-W32/Bagle.cc – .dd; -W32/Blaster.worm; -W32/Bropia.worm.a – .p;
-W32/Bropia.worm.bx/by; -W32/Bropia.worm.q – .u;
-W32/Bropia.worm.q – aj; -W32/Bugbear@MM; -W32/Bugbear.j@MM;
-W32/Deborm.worm.gen; -W32/Dumaru; -W32/Dumaru.bd – bg@MM;
-W32/Elkern.cav; -W32/Fizzer.gen@MM; -W32/FunLove;
-W32/IRCBot.worm; -W32/Klez; -W32/Lirva; -W32/Lovgate;
-W32/Lovgate.aq@MM; -W32/Lovgate.ar@MM; -W32/Korgo.worm;
-W32/Korgo.worm.aa.dam; -W32/Korgo.ag – .ai; -W32/Korgo.worm.ae;
-W32/Korgo.worm.aj; -W32/Mimail; -W32/MoFei.worm; -W32/Mumu.b.worm;
-W32/Doomjuice.worm; -W32/Mydoom; -W32/Mydoom.ad – .ah@MM;
-W32/Mydoom.an@MM; -W32/Mydoom.ao – bb@MM; -W32/Mydoom.bc – bd@MM;
-W32/Mydoom.be@MM; -W32/Mydoom.bf – bi@MM; W32/Mydoom.bw@MM;
-W32/Nachi.worm; -W32/Netsky; -W32/Netsky.ag@MM; -W32/Nimda;
-W32/Nimda.u@MM;-W32/Bagle.ba – .bd@MM, -W32/Bagle.bh – bm@MM;
-W32/Netsky.ah – .ai@MM, -W32/Pate; -W32/Pate.d; -W32/Sasser.worm;
-W32/Sasser.worm.g; -W32/SirCam@MM, -W32/Sobig; -W32/Sober;
-W32/Sober.j@MM, -W32/Sober.k@MM, W32/Sober.l@MM;
-W32/Sober.m – .p@MM; W32/Sober.r@MM; -W32/Swen@MM; -W32/Yaha@MM;
-W32/Zafi; -W32/Zafi.c@MM; -W32/Zafi.d@MM; -W32/Zafi.e@MM;
-W32/Zindos.worm; – W32/Zobot.worm

Windows ME and XP utilize a restore utility that backs up selected files automatically to the C:\_Restore folder. This means that an infected file could be stored there as a backup file, and VirusScan will be unable to delete these files. You must disable the System Restore Utility to remove the infected files from the C:\_Restore folder

tusfiles
Click Here…

*********************************

ifile
Click Here…

*********************************

secureupload
Click Here…

Rar Password: www.mubeenmehmood.blogspot.com

SnapShot 1.0.6 | 2.05 MB

SnapShot is a lightweight, yet powerful, full-featured screen capture tool. SnapShot is a no nonsense screengrabber or screenshot taker that allows you to grab your desktop, window, or any part of the screen and save it as JPG or PNG mubeenmehmood (all the usual popular formats are available) or send it straight to your favorite editor, for further editing. You can also send screen captures as an attachment with the build-in e-mail engine, or upload them via FTP. Other features include global hotkeys, automatically save screen captures, automatic filename generation and support for external editors.

Features

Capture screen, window, rectangular area
Global configurable hotkeys to instantly activate screen capturing
Options to specify output destination (file, editor, clipboard, printer, e-mail)
Save in BMP, GIF, JPEG, PCX, PNG, PSD, and TIFF formats
Run minimized or minimize to System Tray area
Include mousepointer, play sound on capture
Supports multiple monitors and Dualview
Automatically save screen captures, automatic filename generation
Send screen captures to Paint or to your favorite image editing program
Send screen captures by build-in e-mail (supports Exchange Server)
Upload screen captures by build-in FTP engine (File Transfer Protocol)
Runs on Windows 98/ME/2k/2k3/2k8/XP/Vista/7/8

tusfiles
Click Here…

*********************************

ifile
Click Here…

*********************************

secureupload
Click Here…

Rar Pass: www.mubeenmehmood.blogspot.com

HsTcp2Com v2.0.4 | 779.61 KB

HsTcp2Com is a communication application for Windows which allows to forward / bridge data between serial ports (RS232, bluetooth, IrDA, USB) represented as COM ports and TCP/IP connections or UDP/IP links. In the simplest scenario it mubeenmehmood is an COM port to TCP/IP converter, but it can bridge data between any combination of COM and UDP or TCP ports, with TCP ports in either client or server modes.

HsTcp2Com can be used to connect to data collection devices such as modems, sensors, bar code scanners, meters, wireless devices, PBXes, any serial instruments to the serial ports of the PC and access that data from anywhere over an IP based network.

Features :
Any COM port to any other COM port (total 32 COM ports are currently supported)
COM port to TCP/IP (TCP client mode)
COM port to TCP/IP (TCP server mode)
COM port to UDP
TCP/IP client to UDP
TCP/IP server to UDP
TCP/IP server to TCP/IP client
UDP to UDP
TCP/IP server to TCP/IP server
Up to 32 links each interconnecting www.softinspire.blogspot.com 2 ports in any combination shown above are able to operate concurrently

Automatic port re-connect of disconnected or failed ports
Runs hidden with an icon in Windows system tray
Optionally auto starts with Windows

Data Forwarding (packetization) Options :
Forward instantly on data receive
Forward on buffer full
Forward on inter-character timeout
Forward on frame end character

Diagnostic and Statistics Functions :
Port status display
Port receive and transmit byte counters
Event log displayed on screen and saved to disk file
Data traffic trace in ASCII or HEX format displayed and saved to disk file
Data traffic echo function (port loopback)
Data traffic generation function (a specified buffer is sent periodically on a timer)
Send specified single buffer function

Limitations in the evaluation version :
Reminder screen on startup
Reminder screen every 30 minutes
Reminder screen requires user input to continue
Evaluation is time limited to 14 days

Customization
Hillstone Software provides additional services for customization, porting and integration of our software to better suit the needs of your products or solutions

Home Page : http://www.hillstone-software.com/

tusfiles
Click Here…

*********************************

ifile
Click Here…

*********************************

secureupload
Click Here…

Rar Pass: www.softinspire.blogspot.com

S Task Planner is a structured task list software. It falls into category of information and project management software. It allows users to easily create, delete, edit, organize and print tasks in a tree-like hierarchical structure

Hs Task Planner operates on project task files, The user can load previously saved project file and continue working on the project. Hs Task Planner offers some of the basic features found in expensive project management packages for a very low price

Microsoft Windows XP / Vista / Windows 7 or similar Operating System

Home Page : http://www.hillstone-software.com

tusfiles
Click Here…

*********************************

ifile
Click Here…

*********************************

secureupload
Click Here…

rar pass: www.mubeenmehmood.blogspot.com

Bitdefender Bootkit Removal Tool 3.0.2.2 (x32/x64) | 21.11 MB

The Bitdefender Rootkit Remover deals with known rootkits quickly and effectively making use of award-winning Bitdefender.

Bootkits are the pinnacle of electronic threats to your computer. They came around with Windows 2000, were consistent development and still bypass the security mechanisms of operating systems. Without a doubt, bootkits are the most dangerous and powerful type of malware, since it undermines the integrity of the system at the most basic level, which is only possible.

Hence, of course, infection bootkit can significantly affect the safety of users. Removing buktitov – extremely delicate process, because they are outside of the file system and can manipulate the security check, returning a copy of the master boot record intact (MBR), when the anti-virus or anti-rootkit utility runs on the infected operating system.

Being quite powerful, rootkits have limitations. One of them is the fact that security measures on the 64-bit (64-bit) operating systems do not allow rootkits install themselves if they do not have a valid digital signature. In general, early in the initialization of the operating system security check filters benign (ie antiviral defense mechanisms) and malicious rootkits, leaving last beyond the possibility of transmission of 64-bit systems.

Bootkits – it rootkits on steroids
Bootkits – are modified rootkits, which load the code from a special area of ​​the system, known as the Master Boot Record (MBR), which has full control after delegating appropriate BIOS boot device. MBR is responsible for initiating the boot loader, which then loads the kernel checks whether the digital signature of the 64-bit kernel drivers. If it is not, the driver is not able to boot, thus blocked rootkit infection early.

However, if the boot sector of the MBR is modified, the bootkit can fix validation of digital signatures at the kernel level, overcoming the last hurdle that prevents unauthorized downloading a rootkit in the system kernel. This is the case with the TDL-4 rootkit that Lego can infect 32 – and 64-bit operating systems.

Program Description
Bitdefender Rootkit Remover (alternative title Bitdefender Bootkit Removal Tool) allows you to quickly and effectively deal with rootkits, using advanced technology to remove Bitdefender malware.

The utility detects and removes rootkits and www.mubeenmehmood.blogspot.com bootkits (MBR-rootkits) – a special type of malicious programs which modify the boot sector MBR, compromising the integrity of the operating system

Unlike other similar tools Bitdefender Rootkit Remover can be started immediately without having to initially boot the system in safe mode (although it may have to restart your computer to complete treatment).

Key features Bitdefender Rootkit Remover:
Utility to remove rootkits can easily handle Mebroot, all members of the family of TDL (TDL / SST / Pihar), Mayachok, Mybios, Plite, XPaj, Whistler, Alipop, Cpd, Fengd, Fips, Guntior, MBR Locker, Mebratix, Niwa, Ponreb, Ramnit, Stoned, Yoddos, Yurn, Zegost, and cleans infection from Necurs (last found a rootkit). Please note that this list may be out of date – the new family of rootkits will be added as soon as they become known.

tusfiles
Click Here…

*********************************

ifile
Click Here…

*********************************

secureupload
Click Here…

Rar Passowrd: www.mubeenmehmood.blogspot.com

O&O AutoBackup 2.0 Build 18 (x86/x64) | 18.16 MB

O&O AutoBackup automatically synchronizes selected files and folders with an external backup device (USB Stick, external USB hard disk, FireWire volume). As an example, you can use O&O AutoBackup to create a backup copy of your photo folder onto a USB stick and set it so that changes made to the original data are automatically taken into account for the next backup.

The copy process will start automatically whenever you connect your USB/Firewire disk to the computer. Using the status bar icon and the status window in the program, you can see when the process is complete and simply remove the external drive at the end.

Home Page – http://www.oo-software.com/

tusfiles
Click Here…

*********************************

ifile
Click Here…

*********************************

secureupload
Click Here…

Rar password: www.mubeenmehmood.blogspot.com

Toolwiz Pretty Photo 2.7.0.0 | 2.57 MB

Toolwiz Pretty Photo is a free image editor. With this free tool, you can modify your photos and make them look better with only few clicks. It does not only include more than 30 professional image filters, but also support Image Resize, Flip, Crop, Rotate,softinspire, Layers, add Shadow, add Frame and so on.

With Toolwiz Pretty Photo, you can change the HUE, Staturation, Color Balance, Curves Tools, Levels, Brightness and Contrast of one photo. You can add special objects to the photo, such as Line, Text, Image, Rectangle, Ellipse, Arrow, Sharp, Pop Message.

Toolwiz Pretty Photo has many speical features to help you modify your photos. Such as Soft Focus, Color Paint, Mosasic Paint, Scrawl Paint, Image Warp, Skin Polish, Skin Color Change. Also Toolwiz Pretty Photo allows you to add Blush, EyeBrows, EyeShadow, Pupil, Eyelashes, Imperial Crown, Headdress, Glasses, Necklace, Spoof, Wig, Hat to the photos,.

Tusfiles
Click Here…

*********************************

ifile
Click Here…

Rar Password: www.mubeenmehmood.blogspot.com

Azureus Vuze 4.9.0.0 (x86/x64) | 12.88 MB

Vuze (formerly Azureus) is a Java based BitTorrent client that offers multiple torrent downloads, queuing/priority systems (on torrents and files), start/stop seeding options and instant access to numerous pieces of information about your torrents. It also features an embedded tracker that is easily set up and ready to use. Vuze connects to the BitTorrent network. BitTorrent is a peer-to-peer protocol designed to transfer files. Users connect directly to send and receive portions of a file, while a central tracker coordinates the action of all peers and manages connections without knowledge of the contents of the files being distributed. With BitTorrent, users upload at the same time they download, so network bandwidth is managed as efficiently as possible. BitTorrent is designed to work better than other file-transfer protocols as the number of people interested in a certain file increases. Vuze supports for 27 languages.

Features of “Vuze”:
• Multiple torrent downloads
• Upload and download speed limiting, both globally and per torrent
• Advanced seeding rules
• Adjustable disk cache
• Only uses one port for all the torrents
• UPnP sets the forward on your router
• Can use a proxy, for both tracker and peer communications
• Fast resume
• Can set a default download dir and move completed files
• Can import torrents automatically from a set dir
• Highly customizable interface
• IRC plugin included for quick help
• Embedded tracker, host your own torrents, automate your shares (periodic scanning of a dir)…
• Distributed Hash Table: host on it a completely decentralised torrent and/or benefit from it when the tracker is offline.
• Play back your PC hard drive content on your iPhone, iPod, iPad, Xbox 360, Playstation 3, PSP, and TiVo.
• Vuze can play virtually any type of video file on full screen HD (720p or 1080p) – AVI, XVID, Quicktime, and more.
• Vuze is giving wings to your collection of HD video. Watch them on all your screens – PC, Mobile, and TV.

Many useful plugins are available:
* Auto-adjustment of your upload and download speeds according to your network charge with Autospeed
* Auto-download torrents with RSS Feed Scanner
* Schedule upload and download speed limits with Speed Scheduler
* Receive a mail when a download finishes with Status Mailer
* Add numerous info on torrents (Extra seeding columns, Country Locator)
* Remote control Azureus through the Swing Web Interface or the HTML Web Interface

tusfiles
Click Here…

*********************************

ifile
Click Here…

*********************************

secureupload
Click Here…

Rar Password : www.mubeenmehmood.blogspot.com

Tag&Rename is a music files tag editor that easily handles all popular digital audio formats. No matter what music compressor you prefer, you can keep mubeenmehmood your music collection organized with Tag&Rename since it is the only tag editor and organizer which has full native support for: mp3 (ID3v1, ID3v2.2, ID3v2.3 and ID3v2.4 tags), MusePack mpc/mp+ (APEv1, APEv2 and ID3v1 tags), Windows Media wma, asf and wmv files, Ogg Vorbis/Flac/Speex (vorbis comments), Apple iTunes and iPod aac (m4a) files including mp4, lossless m4a and protected m4p files, most popular lossless codecs including Monkey's www.softinspire.blogspot.com Audio, Flac, Wav Pack, Optim Frog, True Audio, Apple, Windows Media lossless and Wav.

Tag&Rename supports many additional tag fields including lyrics, cover art, rating, mood, disc #, part of a compilation, album artist, classical music fields (Composer, Conductor, etc.), file related URL's and so on. With Tag&Rename, you can:

- manually edit music files tags
- automatically fix and complete file tags using online freedb database
- load titles and cover art from mubeenmehmood amazon.com server
- get tags data from file names and its folders structures
- rename your music files and folders according to its music information in a batch
- create play lists
- export files information to CSV, HTML, XML and text formats and more

Tag&Rename supports many files and tags standards in an easy and intuitive way, so you can work with music metadata and not have to think about files codecs and tags versions - Tag&Rename does it all.

Download here

Use up to 64 cameras including Network IP cameras, USB cameras, capture cards, or your PC desktop.
. Keep an eye on your home from anywhere, turning your computer into a video surveillance system.
. Broadcast live camera video on internet, standard Flash stream mubeenmehmood and window media stream.
. Video motion detect and audio detect for Email alerts and recording, standard MP4, ASF, FLV, AVI files.
. Support more than 100 IP camera manufacturers.

Supported IP Cameras
Acti, Airlink, Allnet, Apexis, Arecont, Astak, Aviosys, Avtech, Axis, Basler, Bosch, Cannon, Compro, D-Link, EasyN, EdiMax, Foscam, Gadspot, Goscam, softinspire, Grandtec, Hawking, Honeywell, Hunt, Intellinet, IQinVision, Jvc, LevelOne, Linksys, Maygion, Mobotix, Panasonic, Pelco, Pixord, Planet, Plustek, Samsung, Sanyo, Siemens, Sony, Topsee, Toshiba, Trendnet, UnionCam, Vivotek, Wansview, Y-cam, Zavio, Zonet IP Cameras etc.

Download here

The voice is reproduced on the addressed remote VoiceCom softinspire.blogspot.com terminal. When finished talking the user releases the key or the button.

VoiceCom supports communication with up to 6 terminals on local LAN (standard edition) or with up to 40 terminals on the LAN (VoiceComPro / professional edition). Each VoiceCom terminal can talk to any of the other VoiceCom terminal (point to point) or to all VoiceCom terminals at once (point to multipoint, broadcast voice announcement).

VoiceCom terminals autodetect each others presence on local LAN and display the remote VoiceCom terminal’s names to the user for communication. The only user configurable parameter at the start is the local VoiceCom terminal’s name. This is entered by the user only once on each VoiceCom terminal.

Example of VoiceCom use scenario is a software house intercom system between different rooms or areas of the house (Each VoiceCom terminal could be named by the user as for example: “Bedroom”, “Kitchen”, “Office”, “Lounge”, “Garage”.

VoiceComPro (professional edition) can be used to setup a software intercom system in a small business connecting up to 40 PCs

OS : Windows 8, 7, Vista and XPLanguage : English